GTO/Linear PRO SW2002XLS Dual Swing Gate Opener (PROSW2002XLS)

A revolutionary time in the world of gate openers just started. GTO/Linear Pro announced its PRO-SW2002XL series of gate openers as the PRO-SW2002XLS series. The XLS series has several upgrades over its predecessor including a 10% increase in the operating speed. The XLS series also contains a new rev-counter board with reed switch technology, which helps the gate opener determine its position. Also, the XLS series includes a better manufactured front mount and scraper seal design. Sadly, the new XLS series control boards and arms are not cross-compatible with the XL series. So, if you purchase an XLS arm for your XL control board, they will not work together.

The GTO/PRO 2002XLS Dual Gate Opener is recommended for residential applications including automating gates made of farm tubing, steel, aluminum, wood, and chain link, along with many other gate types. This opener can be installed either on the left or right side of your gate and is used in the standard pull-to-open operation. By purchasing the push-to-open bracket (347IH) (not included) the GTO/PRO 2002XLS can be used to push the gate open away from the property with the arms still mounted on the inside. The GTO/PRO 2002XLS Dual Opener is a low voltage system, getting rid of the need to run expensive 110 volt AC power wire to your gate. Simply run 16-gauge low voltage 2-conductor wire to a household outlet within 1000' of the operator or use a solar panel within 200' using the same wire. With the GTO/PRO 2002XLS's oversized control box, you can house (2) 7 amp/hour batteries to accommodate higher opening cycle situations and extra storage for solar. (Second battery is not included). The GTO/PRO 2002XLS Dual Opener can be used with GTO Inc.'s complete line of accessories including keypads, transmitters, exit wands, gate locks, solar panels, and more.

The GTO/PRO 2002XLS Dual Opener is considered a DIY system that is easy to install. Because of its low voltage system and easy design, there is no need to hire an electrician or welder for installation, saving our customer extra money. This model is also the smallest end of the GTO XLS/PRO line.

• Gate Length and Weight - Up to 12ft in length OR 400lbs, Click here for Graduated weight vs. length scale*
• Gate Materials - Light Wood, Light Steel, Aluminum, Vinyl, Chain Link, and more
• Gate Post or Column Size (pull to open design) - Max 4"x4" post or gate mounted 2" from the rear face of a column (the gate side facing the property)
• Push to Open - Yes (bracket sold separately); setback does not apply to push to open
• Power - Battery (included) and Low Voltage Trickle Charge (included; 12V DC system)
• Solar Compatible - Yes
• Max degree of opening - 110 degrees
• Power Wire Specification - 16 gauge wire (purchased separately) with 1,000 foot max length from transformer to control board.
• Operating Temperature: -5 ºF to +160 ºF
• Warranty:2-year manufacturer control board/ 2-year component manufacturer warranty.

• Soft Start/Soft Stop - Soft start/soft stop is a feature in which the control board, during the set up process, learns where your opening and closing points are for the swing of the gate. Then during normal operation the gate operator automatically slows the motion of the gate to smoothly meet with the gates destination point. This feature can also be turned off.
• Closing Timer - Set your gate to close between 3 and 120 seconds after reaching the full open position or turn this option off to leave it open until an entry device activates closing motion.
• Learn Mode - With the GTO/PRO 2002XLS the learning process, the end points are determined by the user via remote. A simple press of the transmitter tells the opener where to stop and when the opener is set to the desired stop points, save the settings on the board.
• Oversized Control Box Housing - The GTO/PRO 2002XLS's oversized control box can house (2) 7 amp/hour batteries and is rated for outdoor use.

The tools and supplies listed below recommended in the manufacturers manual. DiYGateOpeners does not provide these tools and supplies, but they can be purchased or rented at local hardware stores.

• Power Drill
• Open End Wrenches - 3/8", 7/16", and 9/16"
• 3/8" Drill Bit
• Hacksaw or Heavy Duty Bolt Cutters
• Small (Flat Bladed) Screwdriver
• Phillips Screwdriver
• Tape Measure
• Level
• Wire Strippers
• C-Clamps - small, medium, and large
• Center Punch
• An extra person will be helpful

The type of gate, power supply, and contributing environmental factors determines whether or not additional supplies are needed. For further details, consult the product manual that comes with this gate opener model.

• Rev-counter board with reed switch technology
• Controller with Jog Button technology used in GPX series
• 12 Volt DC/ 7.0 amp hour, sealed, rechargeable battery
• Control Box
• Operator arms with power cable
• Control Board
• Receiver Antenna
• Entry transmitter
• Mounting hardware for a post mounted installation
• AC transformer
• Low Voltage Transformer
• (1) Remote
• Spanish/English Manual

In addition to providing innovative and renowned products, DIYGateOpeners.com has a unique website that allows customers to truly visualize their security aspirations. On the website, customers can utilize the virtual builder to create a representation of their home security gate system, complete with varying gate materials and designs. The customization doesn't stop there, however. DIYGateOpeners.com ensures that all points of gate opener installation are taken into account by offering such considerations as distance to a power supply, distance from the house to the gate, the number of homes secured by the gate, etc. By allowing customers to consider these points, DIYGateOpeners.com ensures that the realization of the design is not only effective but also possible; there will be no trial and error with fitting the proper gate opener to a customer's security needs. Furthermore, our Discount It Yourself packages allow customers to choose exactly what they need, not what someone else thinks they need. Every gate opener design is truly customized to the consumer's specifications.

The website design is all about putting the customer's needs first, and DIYGateOpeners.com does not stop there. The difference of any gate opener or accessory that a customer finds on an authorized dealer's website for cheaper will be refunded, plus 10% of that difference. Similarly, if the 9am-9pm EST Tech Support Hours do not fit a customer's schedule, the customer need only send in an e-mail detailing expected installation time, and DIYGateOpeners.com will respond with a number for the customer to reach a representative during the scheduled installation. How many other companies will alter their business hours for a customer? At DIYGateOpeners.com, the customer does come first.