PRODUCT DESCRIPTION:
Proudly manufactured in the USA, the Ranger 500 Dual Swing Gate Opener is the simplest gate opener for the Do-It-Yourself installer with plug n go design of all installed components and an easy to understand Ranger control board. It can be mounted to 2 different positions behind the cross member which makes the look of the gate even better.
This unit requires a 12-Volt DC battery (not included) and is charged by an AC power (120 VAC) plugin transformer (Included). This transformer can be installed up to 1000' within the gate area. An additional extension cable is required if the power is more than 10' away from the opener control box.
The Ranger 500 gate opener is solar compatible (sold separately). This unit can provide incredible performance with a standard 6 Watt solar panel. With a fully charged battery, this unit can operate up to 65 cycles per day.
Cycles may vary depending on the solar zone you're located in. We do recommend to check our solar region map to choose the correct solar panel that better fit your application.
THE BASICS:
- Gate Materials: Ornamental Iron Gates, Farm Gates, Ranch Gates and Chain Link Gates
- Weight and length: Up to 13' in length or 400 lbs. Find Your Gate Type
- Max degree of opening: 90 degrees
- Gate Post or Column size (pull to open): The pre-drilled hole on actuator bracket must be located 5" behind the gate hinge and 7 1/2" to the inside of the property.
- Push to Open: Yes. The pre-drilled hole on actuator bracket must be located 7" in front of the gate hinge and 4" to the drive side of the hinge.
- Solar Compatible: Yes (5 watt panel kit sold separately)
- Power: 12 volt DC battery (not included)
- Power Wire Specification: Transformer is supplied with 12 feet of cable, if extension is needed use Sentry Charge Cable Extension Kit (part #630050).
- Operating Temperature: -22 to 158 F
- 3-year control board and component warranty
DETAILS:
- Manufactured in the USA
- Two 2 button remotes are included
- The LCR dual channel receiver is pre-wired and solar friendly
- Solar or AC charged with solar friendly smart controller
- Compatible with all types of solar friendly accessories and does not require additional solar panels
- Sensitivity adjustments for Gate 1 and Gate 2
- Battery powered providing real battery backup
- Battery Under Load Monitoring/Low Battery audible Notification
- Built in timer to close
- Photo Eye Power Management (PEPM) solar friendly software
- Photo eye transmitter is battery powered or hardwired
- For residential, light commercial, farm and ranch use
- Non-corrosive actuator and control box with hinged control box cover
- Bolt on hardware kit included
- Recommended battery type (not included): 12-volt, Group U-1; sealed (maintenance free); 30 amp hour minimum
- PWM Soft Start and Soft Stop
- “Gate APP” Compatible from USAutomatic Powered by Nexx.
- Gate travel speed ~16 seconds
- Electronic Limit Control on Board
TOOLS AND SUPPLIES FOR INSTALLATION:
The tools and supplies listed below are suggested in the manufacturers manual. DiYGaterOpeners does not provide these tools and supplies, but they are available at local hardware stores for purchase or rental.
- SAE Standard wrenches & sockets
- Nut Driver
- Wire Cutter/Strippers
- Drill
- Drill bits
- Drill adapter for socket attachment
- Pliers
- Hack saw
- Level and tape measure
U.S. Automatic Ranger 500 gate openers come with bolt-on brackets that will require additional maintenance to keep them secure. To provide the correct support, and to fasten the linear actuator mount, we recommend installing the brackets using carriage bolts, lock nuts, and washers (Do Not Use Lag Type Bolts). Loose or unsecured installation of linear actuator mount will cause the unit to fail and not properly operate.
The type of gate, power supply, and contributing environmental factors determines whether or not additional supplies are needed. For further details, consult the product manual that comes with this gate opener model.
WHY DIYGATEOPENERS.COM?
In addition to providing innovative and renowned products, DIYGateOpeners.com has a unique website that allows customers to truly visualize their security aspirations. On the website, customers can utilize the virtual builder to create a representation of their home security gate system, complete with varying gate materials and designs. The customization doesn't stop there, however. DIYGateOpeners.com ensures that all points of gate opener installation are taken into account by offering such considerations as distance to a power supply, distance from the house to the gate, the number of homes secured by the gate, etc. By allowing customers to consider these points, DIYGateOpeners.com ensures that the realization of the design is not only effective but also possible; there will be no trial and error with fitting the proper gate opener to a customer's security needs. Furthermore, our Discount It Yourself packages allow customers to choose exactly what they need, not what someone else thinks they need. Every gate opener design is truly customized to the consumer's specifications.
The website design is all about putting the customer's needs first, and DIYGateOpeners.com does not stop there. The difference of any gate opener or accessory that a customer finds on an authorized dealer's website for cheaper will be refunded, plus 10% of that difference. Similarly, if the 9am-9pm EST Tech Support Hours do not fit a customer's schedule, the customer need only send in an e-mail detailing expected installation time, and DIYGateOpeners.com will respond with a number for the customer to reach a representative during the scheduled installation. How many other companies will alter their business hours for a customer? At DIYGateOpeners.com, the customer does come first.
Manual: USAutomatic Ranger 500 Installation Manual (Current Release)
QB ID: 020511
|