|
|
|
|
|
|
Free Ground Shipping to Continental U.S. territories. Excludes Alaska, Hawaii, Puerto Rico, and other non-U.S. territories.
The Nice Apollo 1600 Dual Actuator Swing Gate Operator is designed for gates up to 16 feet long and 600 pounds each. The Apollo 1600 is extremely easy to install and is a fantastic choice for residential, farm, ranch, or light commercial applications.
- Gate Materials: Wood, Steel, Aluminum, Vinyl, Chain Link, and others.
- Weight and length: Up to 16' in length and 600 lbs.
- Max degree of opening: 105 degrees
- Gate Post or Column size (pull to open): Max 8" x 8" post or gate mounted 6" from the rear face of a column.
- Push to Open: Yes - setback above does not apply to push to open.
- Solar Compatible: Yes (purchased separately).
- Power: Battery (Not Included) and Low Voltage Trickle Charge (Included)
- Operating Temperature: -4º to 122º F (-20º to 50º C)
- Warranty: 2 year manufacturer control board, 2 year component manufacturer warranty.
- Control Board: Features the 636 control board (The 636 control board is now the replacement for model 635)
- For this board to function a UL 325 photo eye safety device must also be attached to the board and used in the operator system.
Gate Crafters offers more expert assistance than anyone. If you need help deciding if this gate opener has the abilities that are right for your gate we have live application specialists available 9am - 9 pm EST 7 days a week or try our exclusive gate opener recommendation tool 24 hours/day.
Nice Apollo 1600 816 Linear Actuator Dual Swing Gate Opener The Apollo 1600 is the basic version of the two Apollo linear actuators. Apollo is known as the premier solar gate opener due to its low power consumption and large battery capacity. Designed for ranchers and built in Texas, this opener allows you the flexibility to position the operating arm on the inside, outside, left side, or right side of the gate, operating in either pull or push mode. This provides you with the freedom to adapt the gate opener to the contours of your property. The Apollo 1600 Dual Gate Opener is a low-voltage system, eliminating the need to run 110 AC power to your gate. Simply run 14-gauge low-voltage wire to a household outlet within 1,000 feet of the operator or use Gate Crafters solar panels (sold separately). With Apollo's generously sized CBOX636 control box, you can accommodate a larger battery than most gate operating systems. A larger battery means more cycles during power outages or periods of low sunlight (if solar power is being used). A fully charged deep-cycle battery will provide up to 300 cycles or an average of 30 days of use on a basic system before requiring a recharge (battery not included). Each cycle consists of a full open and close, taking approximately 15 seconds in each direction. **For this board to function a UL 325 photo eye safety device must also be attached to the board and used in the operator system. Gate Crafters has the resources you need.
How do you use your gate opener system once you get it? Gate Crafters is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
|
| Option: | 636 Control Board: | | Auto Reverse Sensitivity | Yes | | Auto Reverse Sensitivity - Adjustable | Yes | | Auto Reverse Sensitivity - Self Adjusting | No | | Auto Close Delay - Adjustable | Yes | | Dual Gate Delay - Adjustable | No | | Timer to Close | Yes | | Secondary Arm Disable | Yes | | 3-Button Station Enable | Yes | | Adjustable Lock Type | No | | Coast Enable | No | | Free Exit Option | No | | Learn Mode | No | | Intelligent Actuator Enable | No | | Microprocessor | No | | Soft Start | No | | Soft Stop | No | | Computer Connection | No | | Gatelink Software Option | No | | Delay for Siren, etc. | No |
%20Banner.jpg)
- 816-1 Actuator with 12' Harness
- 816-2 Actuator with 42' Harness
- Control Box
- 636 Control Board
|
- Pivot Arm
- Gate Bracket
- Actuator Bolt Kit
- Manual
|
- (2) Estate Swing Remotes
- (1) Estate Swing 2-Channel Receiver
- Low Voltage Charging Controller and Transformer
- Adjustable Bolt On Brackets
|
 At Gate Crafters, we cater to our DIY customers. With every Apollo Gate Opener kit, you receive a Gate Crafters DIY install kit. This kit includes user-friendly installation brackets that easily bolt to your posts or columns and to the pivot arm. Also included are two 433 MHz transmitters and one 433 MHz receiver. Our experienced technical staff has been assisting DIY customers for over a decade and has built extensive knowledge about installation and technical support for Apollo gate openers. Gate Crafters’ technical staff is available seven days a week to help you with installation and technical questions. Today’s gate opener systems can be installed using simple household tools. These systems are designed to operate on low-voltage wiring, which you can handle yourself without the need to hire an electrician. By installing your Apollo gate opener yourself, you can save thousands of dollars over the life of your gate opener. You'll gain valuable knowledge about your installation and how the gate opener works, making it easier for you to troubleshoot your system and perform routine maintenance if needed in the future. Gate Crafters is the DIY factor.
Gate Crafters further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.
- Order specific customized accessory wiring instructions
- 360 degree accessories - we can take you through exit, entry, safety, power, and all other minute details to create a fully rounded kit.
- Free 24/7/365 Installation Support
- Free 7 day/week Technical Support
- Largest Number of Certified Techs in America
- Free assistance to find the right gate opener for your gate
- Free systems design assistance to match the right accessories to fit your needs.
- Extremely competitive pricing
- Free shipping on all accessories purchased with a gate opener
- We stock replacement parts
- Many brands of many types of accessories, enough to handle just about any operational situation you can imagine
Gate Crafters has actual experience.
We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
The following tools and supplies are suggested in the manufacturer manual for optimal installation. They are not provided by Gate Crafters, however, most tools are available at local hardware stores for purchase or rental.
- Welder, unless optional bolt-on pivot arm (P/N 446) is used.
- Basic hand tools (screwdrivers, wrenches, pliers, etc..)
- Bubble Level (for ensuring pivot arm and actuator are level)
- Framing square (for determining pivot arm location)
- Wire cutters/strippers
- Drill and assorted size bits
- Hardware for mounting control box
- Electrical conduits, grommets, asphalt patch, etc. as needed
Please refer to the Installation Manual for Tools Needed. Depending on the type of gate, power supply and contributing environmental factors additional tools or supplies may be needed. Please review the product manual associated with this gate opener model for further details. |
|
Words from Senior Application Engineer Anthony Geato | Top of Page |
“The Apollo NICE 1550, 1650, 1500, and 1600 are the Rancher’s choice when it comes to agricultural gate openers. Apollo is the industry leader in solar powered gate opener and build their gate openers to last. When you buy an Apollo 1600 gate opener from Gate Crafters, we include a complete DIY kit for you. This kit include the bolt on brackets that attach your gate opener to your post, 2 transmitters, receiver, power transformer and charging board if you need it for your gate opener. Gate Crafters also sells key pads that works wirelessly with the included receiver. I started Gate Crafters back in 2002 with the goal of providing high quality gate openers to homeowners who wanted to do it themselves. Please give us a call, use the live chat on our website, or send us an email to speak with one of our experts who will help you find the right gate and gate opener for your home or business.”
Manual: Apollo 1500/1600 Installation Reference Manual
QB ID: 1600 433
|
|
|
|
|
|
|
|
|